Thanks to a precise thermal sensor, THERMO ACCESS can measure the user’s temperature immediately.
THERMO ACCESS is intuitive and easy to use: the user’s face is framed by the camera and mirrored on the monitor, which will show the correct positioning of the face with green, or alternatively, its wrong positioning with red.
The system is configured according to the “Shared Protocol for the regulation of the measures to combat and limit the spreading of Covid-19 in the workplaces – March 14, 2020” and subsequent additions and it is set at 37,5°C (settable). At the end of the procedure, the monitor will show whether it is possible to access the area or not.
The time needed for the temperature measuring is 5 seconds.
- Device ready for measuring
- Wrong framing of the face (red frame)
- Correct framing and initialization of temperature measuring (green frame)
- Green monitor: ACCESS PERMITTED
- Red monitor: ACCESS DENIED
- Access denied due to limit of contemporary presences
BASE SUPPORT WITH BUTTON TO COUNT EXITING PEOPLE (OPTIONAL)
The Totem, Totem Duo products and their customizable versions can also be used to regulate the number of people that can be hosted inside the room in order to enhance adherence to minimum distance requirements foreseen by the norms into force.
This option is extremely important particularly to avoid hiring personnel dedicated to this specific task.
Once the body temperature measuring is completed, the system allows the entrance of the person and counts it. If the user exceeds the maximum number of people forecasted, he/she will be requested to wait thanks to a specific message on the monitor.
An additional base support is provided to count people exiting the area, inclusive of a 100-meter cable. For example, this item can be made available near a shop’s cashier. Whenever the cashier completes a checkout, they will push the button to signal the exit of a client and therefore allow access of the following one. Alternatively, the people counting button at the exit can be pushed by the client. The base support is designed to be pushed with the hand or elbow. In order to avoid contamination as much as possible, we suggest to regularly sanitize the device.
We point out that the system foresees also the possibility to purchase several base supports that can communicate with the Totem /Totem Duo; if there is more than one check-out point in the store, it is possible to buy several base supports to count exiting people.
In case the base support to count exiting people is bought together with the totem, the device will be ready for use and the Purchaser should only place it in the ideal position. In case the device is bought afterward, the Thermo Access technicians, thanks to the remote access, will configure the maximum number of people that can enter the area. Once the device arrives, one only needs to connect it to the totem (requiring a few minutes) and the system will be fully functioning.
We suggest to install it at the end of the working hours, so that it is possible to verify the functioning with the Thermo Access technicians and avoid any disruptions.
EMPLOYEE BADGE READING WITH CONNECTION TO COMPANY’S MANAGEMENT SYSTEM (OPTIONAL)
In the Totem, Totem Duo and Desk versions, Thermo Access has the possibility to be equipped with a badge reader.
This option must be ordered simultaneously with totem, NOT later.
The reader is placed next to the multifunction display. The user, who comes to the temperature measurement, is recognized by badge; their name or surname or, possibly, their recruitment number – at the company’s discretion – will appear on the monitor. Once the body temperature is detected, it can be recorded in the company’s management system, with an indication of the time of measurement and the temperature detected.
The privacy procedures will be set according to the protocols provided by the Purchaser; the system allows very high scalability; there is also the possibility of recording the video/temperature detection frame.
The badge-equipped system requires a configuration that communicates directly with the company’s management system in use, that can be done in a pre-set way, if the system data are provided at the order or, possibly, with remote assistance from Thermo Access technicians.
The badge system requires a maximum time of 15 days from the order date, for the shipment to the Purchaser (shipping times not included).
MANAGEMENT OF ACCESSES AND ENTRANCES (OPZIONALE)
The Totem, Totem Duo and Desk versions of Thermo Access can be integrated with a system that manages accesses and entrances (turnstiles, automated opening doors, revolving doors and/or similar devices) previously existing in the place of installation.
It is necessary that at the order or afterward – in case it is bought as an option – the Purchaser writes an email to email@example.com with the references of the type of automated opening door, turnstiles or other, and specify its brand and model.
The Thermo Access technicians will include access management in the configuration and such can be connected with an interface cable or with an Ethernet communication, depending on the device and the software managing it.
How does it work: the user measures the temperature according to the standard method; once this is done if the result is negative (no temperature), the turnstiles – automated opening door – others, will allow the passage. In case the result is positive (meaning above the 37,5 °C), the turnstiles – automated opening door – others, will not allow the passage and the authorization.
All Thermo Access products, therefore Totem – Totem Duo – Desk – Mini, can be customized in terms of graphics; all you need to do is select the appropriate option when placing the order.
We point out that customized products from a graphic point of view requires a 15 days manufacturing from the date of receipt of the graphic file sent by the Purchaser, in addition to the selected shipping times.
How it works:
As soon as the device is ordered with the customized graphic option, the Purchaser will receive an email from the address firstname.lastname@example.org containing the template of the sticker measurements to be customized. The buyer, through a person appointed by him (graphic designer), will return the definitive draft print of the graphics.
If the Purchaser could not rely on a qualified person for this activity, Thermo Access provides the possibility of a specialized consultancy, payment service. The quotation for this service must be requested by sending a specific email to email@example.com. The Purchaser will be contacted directly by the appointed graphic designer within two days from receiving the email.